![background image](http://html.mh-extra.com/html/hyundai/56256/56256_manual_2197290011.webp)
13
ENGLISH
DESCRIPTION (FIG. A1 - B4)
Your mitre saw has been designed for
sawing wood and wood products.
1. Laser
2. Laser on/off switch
3. Laser cover
4. Power cord
5. Cutting arm
6. Head lock
7. Control lever
8. Handle
9. Upper fixed guard
10. Work clamp
11. Lock for work clamp
12. Rotating guard
13. Guard retraction arm
14. Protective cap screw
15. Connection for dust extraction
16. Bevel angle lock
17. Bevel scale
18. Guide
19. Mitre table
20. Mitre scale
21. Table inlay
22. On/off switch
23. Table locking lever
24. Mitre lock
25. Axle lock button
26. Slide rod
27. Push rod clamp screw
28. Slot depth adjustment screw
29. Depth stop
30. Lock nut slot depth
31. Slot stop
32. Saw head tilt adjusting screw
33. 0° adjustment screw
34. Switch lock button
35. Table extension (x2)
36. Carrying handle
Packaging contents
• Mitresaw
• Workpiece clamp
• Table extension bracket (2x)
• Allen key
• Dust bag
• Instructions for use
• Safety regulations
• Guarantee and service
ASSEMBLY
Dust bag (fig. A1 + A4)
• Clamp the dust bag to the dust bag connection
(15).
• Empty the dust bag when it is 2/3 full.
Table extension brackets (fig. A2)
• Insert the brackets into the openings on the
sides of the base.
• Lock the brackets with the screws on the front of
the base plate.
Workpiece clamp (fig. A1)
The adjustable workpiece clamp (10) can be placed
on both the left and the right.
Always fix the workpiece in place using
the workpiece clamp.
Placement of the machine (fig. A1)
• The machine must be attached to a solid and
flat surface using nuts and bolts (not supplied).
• First mark out the mounting holes on the
workbench.
• Drill holes on the marked locations.
• Position the machine on the workbench and
insert the bolts through the mounting holes.
• Fit locking rings and tighten the bolts properly.
Precision setting of the cutting angles (fig. A1 - B4)
Although the machine has been precisely set up in
the factory, it is adviisableto check the 0° and 90°
settings in order to make sure that these have not
moved during transportation.
Disconnect the machine from the mains
supply before checking or changing
settings.
• Press the cutting arm (5) downwards.
• Press the head lock (6) to lock the cutting arm in
the transportation position.
• Loosen the mitre lock lever (24).
• Rotate the mitre scale (20) until the pointer
points to 0°.
• Tighten the mitre lock lever (24).
• Loosen the bevel angle lock (16) and adjust the
cutting arm (5) at a 90° angle to the mitre table
(19).