HYUNDAI
16
13. Lower the rotary guard (12), hold onto it and
insert the guard screw (14) and screw it tight.
14. Reconnect the machine to the mains supply and
start it to check whether the saw blade is turning
correctly.
Moving the machine (fig. A1)
• Make sure that the saw head is locked in the
lowest position before moving the machine.
• Tighten all adjustment screws and handles.
• Only lift the saw by the carrying handle (36) or
by the base.
CLEANING AND MAINTENANCE
The machine does not require any special
maintenance.
• Regularly clean the ventilation slots.
• From time to time, apply a drop of oil to the
thread of the fixing screw.
TECHNICAL DATA
Mains voltage
V~
220-240
Mains frequency
Hz
50
Power input
W
2,000
S1
W 1,800
S6
W 2,000
No load speed
min
-1
3,800
Min. speed rating saw blade min
-1
7,000
Saw blade diameter
mm
305
Saw blade bore
mm
30
Mitre table angle
- 45°/0°/+ 45°
Straight cut (0° x 0°)
mm
105 x 335
Mitre cut (0° x 45°)
mm
105 x 235
Bevel cut (45° x 0°)
mm
35 x 235
Compound
mitre cut (45° x 45°)
mm
60 x 235
Weight
kg 21
Laser
Wavelength
nm 650
Laser class
2
Protection class
III
Sound and vibrations
L
pA
(sound pressure)*
dB(A)
95
L
wa
(acoustic power)**
dB(A)
108
Vibrations*** m/s
2
2.5
*Uncertainty K=
dB(A)
3
**Uncertainty K=
dB(A)
3
***Uncertainty K=
m/s
2
1.5
Wear ear protection.
GUARANTEE
Refer to the enclosed guarantee
conditions for the terms and conditions of
guarantee.
ENVIRONMENT
Your product, accessories and packaging
should be sorted for environmental-
friendly recycling.
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2002/96/EC for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
Subject to change; specifications can be changed
without further notice.
