Hyundai 2011 VERACRUZ Owner'S Manual Download Page 119

Page: 119 / 429

4 35

Features of your vehicle

Resetting the sunroof

Whenever the vehicle battery is discon-
nected or discharged, or related fuse is
blown, you must reset your sunroof sys-
tem as follows:

1. Turn the ignition switch to the ON

position and close the sunroof com-
pletely.

2. Release the control lever.
3. Pull and hold the control lever down-

ward until the sunroof tilts and slightly
moves up and down. Then, release
the lever.

4. Pull and hold the control lever down-

ward until the sunroof is operated as
follows;

TILT DOWN

→

SLIDE OPEN

→

SLIDE CLOSE

Then, release the control lever.

When this is complete, the sunroof sys-
tem is reset.

❈

For more detailed information, contact
an authorized HYUNDAI dealer.

CAUTION

If the sunroof is not reset when the
vehicle battery is disconnected or
discharged, or related fuse is
blown, the sunroof may operate
improperly.

Summary of Contents for 2011 VERACRUZ














































































































































































































































































































































































































































Search results

Summary of Contents for 2011 VERACRUZ

Reviews:

Related manuals for 2011 VERACRUZ

Brands by name

Popular brands

Hyundai 2011 VERACRUZ, Owner'S Manual

Search results

Summary of Contents for 2011 VERACRUZ

Reviews:

Related manuals for 2011 VERACRUZ

Brands by name

Popular brands