Hyundai 2011 VERACRUZ Owner'S Manual Download

Page: 397 / 429

Maintenance

5. Remove the bulb from the headlight

assembly.

6. Install a new headlight bulb and snap

the headlight bulb retaining wire (high
beam) into position by aligning the
wire with the groove on the bulb.

7. Connect the headlight bulb socket-

connector.

8. Install the headlight bulb cover by turn-

ing it clockwise.

G220102AEN-EU

Front turn signal, position, side mark-
er and fog light bulbs (if equipped)

If the light bulb is not operating, have the
vehicle checked by an authorized
HYUNDAI dealer.

G220200AEN

Side repeater light bulb replace-
ment

If the light bulb is not operating, have the
vehicle checked by an authorized
HYUNDAI dealer.

G220300AEN-EU

Rear combination light bulb
replacement

(1) Tail light
(2) Back-up light
(3) Rear turn signal light
(4) Stop and tail light
(5) Rear side marker light

OEN076031

OEN076032

OEN076033

Type A

Type B

Summary of Contents for 2011 VERACRUZ














































































































































































































































































































































































































































Search results

Summary of Contents for 2011 VERACRUZ

Reviews:

Related manuals for 2011 VERACRUZ

Brands by name

Popular brands

Hyundai 2011 VERACRUZ, Owner'S Manual

Search results

Summary of Contents for 2011 VERACRUZ

Reviews:

Related manuals for 2011 VERACRUZ

Brands by name

Popular brands