manualshive.com logo in svg

Hyundai 2007 Accent, Owner'S Manual, Page: 235 / 283

Share
Download
Hyundai 2007 Accent Owner'S Manual Download Page 235

6

DO-IT-YOURSELF MAINTENANCE

16

3. Take out the climate control air filter

and replace it with a new one.

4. Installation is the reverse order of dis-

assembly.

OMC055013

G200A01A-AAT

Replacing a Fusible Link

A fusible link will melt if the electrical
circuits from the battery are ever over-
loaded, thus preventing damage to the
entire wiring harness. (This could be
caused by a  short in the system drawing
too much current.) If this ever happens,
have a Hyundai dealer determine the
cause, repair the system and replace the
fusible link. The fusible links are located
in a relay box for easy inspection.

OMC045003

CAUTION:

When replacing a fusible link, never
use anything but a new fusible link with
the same or lower amperage rating.
Never use a piece of wire or a higher-
rated fusible link. This could result in
serious damage and create a fire haz-
ard.

!

CHECKING AND REPLAC-
ING FUSES

Summary of Contents for 2007 Accent




























































































































































































































































































Reviews:

No comments