manualshive.com logo in svg

Hyundai 2007 Accent, Owner'S Manual

The Hyundai 2007 Accent Owner's Manual is an essential companion for owners of this reliable vehicle. Easily downloadable and completely free, it provides comprehensive guidance on maintenance, troubleshooting, and operating procedures. Visit our website to access the manual and unlock its valuable insights at your convenience.

Share
Download
background image

2

DRIVING YOUR HYUNDAI

18

C160K01A-AAT

Carry Emergency Equipment

Depending on the severity of the weather
where you drive your car, you should
carry appropriate emergency equipment.
Some of the items you may want to carry
include tire chains, tow straps or chains,
flashlight, emergency flares, sand, a
shovel, jumper cables, a window scraper,
gloves, ground cloth, coveralls, a blanket,
etc.

C160H01A-AAT

Use Approved Anti-Freeze in Win-
dow Washer System

To keep the water in the window washer
system from freezing, add an approved
anti-freeze solution in accordance with
instructions on the  container. Window
washer anti-freeze is available from
Hyundai dealers and most auto parts
outlets. Do not use engine coolant or
other types of anti-freeze as these may
damage the finish.

C160G01A-AAT

To Keep Locks from Freezing

To keep the locks from freezing, squirt an
approved de-icer fluid or glycerine into
the key opening. If a lock is covered with
ice, squirt it with an approved de-icing
fluid to remove the ice. If the lock is frozen
internally, you may be able to thaw it out
by using a heated key. Handle the heated
key with care to avoid injury.

C160I01A-AAT

Don't Let Your Parking Brake Freeze

Under some conditions your parking brake
can freeze in the engaged position.  This
is most likely to happen when there is an
accumulation of snow or ice around or
near the rear brakes or if the brakes are
wet. If you think the parking brake may
freeze, apply it only temporarily  while
you put the gear selector lever in "P"
(automatic) or in first or reverse gear
(manual transaxle) and block the rear
wheels so the car cannot roll. Then re-
lease the parking brake.

C160J01A-AAT

Don't Let Ice and Snow Accumulate
Underneath

Under some conditions, snow and ice
can build up under the fenders and inter-
fere with the steering. When driving in
severe winter conditions where this may
happen, you should periodically check
underneath the car to be sure the move-
ment of the front wheels and the steering
components is not obstructed.

Summary of Contents for 2007 Accent




























































































































































































































































































Reviews:

No comments

Related manuals for 2007 Accent

IAME Parilla X30 Assembly Instructions And User'S Manual preview
Parilla X30
Brand: IAME Pages: 17
Taffio CH7102-FCX9 Quick Start Manual preview
CH7102-FCX9
Brand: Taffio Pages: 8
Daewoo RACER 1998 Electrical Wiring Diagram preview
RACER 1998
Brand: Daewoo Pages: 68
Hyundai Getz 2004 Owner'S Manual preview
Getz 2004
Brand: Hyundai Pages: 437
Honda 2004 S2000 Owner'S Manual preview
2004 S2000
Brand: Honda Pages: 208
Honda 08A28-0J6-800 Installation Instructions Manual preview
08A28-0J6-800
Brand: Honda Pages: 32
Dakota Digital MCL-7000 Series Quick Start Manual preview
MCL-7000 Series
Brand: Dakota Digital Pages: 2
Volvo 2010 C30 Owner'S Manual preview
2010 C30
Brand: Volvo Pages: 284
CALIMA 46008 Operating Instructions Manual preview
46008
Brand: CALIMA Pages: 9
Calitop Calispace Ocean 80 Assembly Instructions preview
Calispace Ocean 80
Brand: Calitop Pages: 5
RBO RBO4038 Product Manual preview
RBO4038
Brand: RBO Pages: 15
Valeo Park Vision VAL632210 Instruction Manual preview
Park Vision VAL632210
Brand: Valeo Pages: 25
Saab 32000574 Installation Instructions Manual preview
32000574
Brand: Saab Pages: 9
AUTOTECH 10.109.418K Installation Instructions preview
10.109.418K
Brand: AUTOTECH Pages: 4
Uniden BTSC1100 Owner'S Manual preview
BTSC1100
Brand: Uniden Pages: 16
Audiovox Auto Security AA-9103N Installation Manual preview
Auto Security AA-9103N
Brand: Audiovox Pages: 1
Westin Sportsman 40-0125 Installation Instructions preview
Sportsman 40-0125
Brand: Westin Pages: 2
Kargo Master 4090L Instruction Manual preview
4090L
Brand: Kargo Master Pages: 10

Brands by name

Popular brands

Load more brands