Hyundai 2007 Accent Owner'S Manual Download Page 146

Page: 146 / 283

FEATURES OF YOUR HYUNDAI

134

o The preset station frequencies are

all erased when the car battery is
disconnected. Therefore, all data will
have to be set again if this should
occur.

o Do not add any oil to the rotating

parts. Keep magnets, screwdrivers
and other metallic objects away from
the tape mechanism and head.

o This equipment is designed to be

used only in a 12 volt DC battery
system with negative ground.

o This unit is made of precision parts.

Do not attempt to disassemble or
adjust any parts.

o When driving your vehicle, be sure

to keep the volume of the unit set low
enough to allow you to hear sounds
coming from the outside.

o Do not expose this equipment (in-

cluding the speakers and tape) to
water or excessive moisture.

CAUTION:

o Do not insert anything like coins into

the player slot as damage to the unit
may occur.

o Do not place beverages close to the

audio system. The playback mecha-
nism may be damaged if you spill
them.

o Do not strike or allow anything to

impact the audio system, damage to
the system mechanisms could oc-
cur.

Summary of Contents for 2007 Accent




























































































































































































































































































Search results

Summary of Contents for 2007 Accent

Reviews:

Related manuals for 2007 Accent

Brands by name

Popular brands

Hyundai 2007 Accent, Owner'S Manual

Search results

Summary of Contents for 2007 Accent

Reviews:

Related manuals for 2007 Accent

Brands by name

Popular brands