Hyundai 2003 Accent Owner'S Manual Download Page 112

Page: 112 / 186

3- 2

WHAT TO DO IN AN EMERGENCY

D010B02A-AAT

If Engine Doesn't Turn Over or Turns
Over Slowly

D010A01A-AAT

IF THE ENGINE WILL NOT START

D010C01A-AAT

If Engine Turns Over Normally but Does
Not Start

1. Check fuel level.
2. Check all connectors at ignition coil and

spark plugs. Reconnect any that may be
disconnected or loose.

3. Check the fuel line in the engine room.
4. If the engine still refuses to start, call a

Hyundai dealer or seek other qualified assis-
tance.

D010D01A-AAT

If the Engine Stalls While Driving

1. Reduce your speed gradually, keeping a

straight line. Move cautiously off the road to
a safe place.

2. Turn on your emergency flashers.
3. Try to start the engine again. If your vehicle

will not start, contact a Hyundai dealer or
seek other qualified assistance.

WARNING:

If the engine will not start, do not push or
pull the car to start it. This could result in a
collision or cause other damage. In addition,
push or pull starting may cause the catalytic
converter to be overloaded and create a fire
hazard.

D010B01A

D010C01A-D

1. If your car has an automatic transaxle, be

sure the gear selector lever is in "N" or "P"
and the emergency brake is set.

2. Check the battery connections to be sure

they are clean and tight.

3. Turn on the interior light. If the light dims or

goes out when you operate the starter, the
battery is discharged.

4. Check the starter connections to be sure

they are securely tightened.

5. Do not push or pull the vehicle to start it. See

instructions for "Jump Starting".

Summary of Contents for 2003 Accent



























































































































































































Search results

Summary of Contents for 2003 Accent

Reviews:

Related manuals for 2003 Accent

Brands by name

Popular brands

Hyundai 2003 Accent, Owner'S Manual

Search results

Summary of Contents for 2003 Accent

Reviews:

Related manuals for 2003 Accent

Brands by name

Popular brands