background image

Safety Information

   4

www.hyundaipowerproducts.co.uk

01646 687 880

[email protected]

Warning

 Like all machinery there is potential danger when operating this machine. Accidents are 

frequently caused by lack of familiarity or failure to pay attention. Use this machine with respect 
and caution to lessen the possibility of operator injury. If normal safety precautions are 
overlooked or ignored, serious personal injury may occur.

!

Safety Warnings

 No list of safety guidelines can be complete. Every environment is different. Always consider 

safety first, as it applies to your individual working conditions. Use this and other machinery with 
caution and respect. Failure to do so could result in serious injury, damage to equipment, or poor 
work results. 

!

When using the machine, always observe the enclosed safety warnings as well as the additional 
safety warnings.

The following symbols are used throughout this manual:

    

Denotes risk of personal injury or damage to the machine.

    DANGER! 

Indicates a hazard, which if not avoided, could result in serious injury or death.

    WARNING! 

Indicates a hazard, which is not avoided, could result in serious injury.

    CAUTION! 

Indicates a hazard, which if not avoided, might result in minor or moderate injury.

NOTE! 

Indicates a situation that could easily result in equipment damage.

Summary of Contents for HYM3200E









































Reviews: