Safety Information
During Use
•
Always hold the unit with both hands when operating. Keep a firm grip on the handlebars.
Be aware that the machine may unexpectedly bounce upward or jump forward if the machine
should strike buried obstacles such as large rocks or roots.
•
Do not operate the machine in confined areas where there may be a risk of crushing the
operator between the machine and another object.
•
Walk, never run with the machine. Be very careful when pulling the machine toward you. You
must look behind you to make sure there are no obstacles.
• WARNING!
If something breaks or an accident happens whilst working, you must turn off the
machine immediately and move the machine away to prevent further damage. If an accident
happens with injuries or third parties are injured, carry out the first aid measures most suitable
for the situation immediately and contact the medical authorities for any necessary health care.
Carefully remove any debris that might cause damage or harm persons or animals should it not
be seen.
•
Do not carry passengers.
•
After striking a foreign object, stop the machine immediately and inspect the machine
thoroughly for damage. Repair the damage before continuing.
•
Never attempt to make any adjustments while the machine is running.
•
Never attempt to move the machine in any way other than intended for normal use while the
motor is running.
• Always turn off the motor and ensure that all moving parts have come to a complete stop
before making any repairs, adjustments, or inspections.
•
Before leaving the machine to clear blockages, check, clean, refuel or after striking foreign
object, stop the machine and make sure that the blades have come to a complete stop.
•
You must disengage the blade, switch off the machine and unplug from the mains (making sure
that all moving parts are stationary):
- Before adjusting the cutting height.
- After striking a foreign object, you must inspect the machine for damage and make repairs
before using it again.
- Before checking or working on the machine.
- Before clearing blockages.
- When transporting the machine.
- Whenever you leave the machine unattended.
• Do not tilt the lawnmower when switching on the motor.
!
9
www.hyundaipowerproducts.co.uk
01646 687 880
