22
8.38
Loosen the jam nuts B and bolts A.
8.39
Slide the engine toward the front plate and slip the V Belt(s) off the pulley.
8.40
Install the new belt.
8.41
Position the V belt(s) over the engine pulley.
8.42
Move the engine back.
8.43
NOTE:
When adjusting the belt(s), make sure that the clutch pulley is in alignment with
the exciter pulley.
8.44
When the V-Belt tension is correct, tighten the Jam nuts B and the engine mount bolts.
8.45
Replace the belt guard.
HYCP5030
HYCP6570
HYCP9070
Exciter Oil
Capacity
– ml
12
0
15
0
1
5
0
Exciter Oil Type
SAE30 or 15W40
8.46
Allow the exciter to cool before changing the oil.
8.47
Remove the belt guard and V-belt(s).
8.48
Remove the bolts that hold the deck to the housing and lift the entire deck, with engine,
away from the housing.
8.49
Remove the pipe plug for the top of the exciter housing.
8.50
Place a suitable container underneath the machine.
EXCITER LUBRICATION
Agitator is pre-filled with oil. Change oil every 200 hours use.
