background image

www.hyundaipowerproducts.co.uk

7

Safety Information

www.hyundaipowerproducts.co.uk

7

• NEVER use fuels such as gasoline, benzene paint thinners, or other oil compounds in this
heater (RISK OF FIRE OR EXPLOSION).
• NEVER refill the heater’s fuel tank while heater is operating or still hot. This heater is
EXTREMELY HOT while operating.
• Keep all combustible materials away from this heater.
• NEVER block air inlet or air outlet of the heater.
• NEVER use duct work in front or at rear of heater.
• NEVER move or handle heater while still hot.
• NEVER transport heater with fuel in its tank.
• If equipped with a thermostat, the heater may start at any time.
• ALWAYS locate heater on a stable and level surface.
• ALWAYS keep children and animals away from the heater.
• Bulk fuel storage should be a minimum of 762cm from heaters, torches, portable generators 
or other sources of ignition. All fuel storage should be in accordance with federal, state, or local 
authorities have jurisdiction.
• NEVER use this heater in living or sleeping areas.
• NEVER use this heater where flammable vapours may be present.

WARNING! Risk Of Burns / Fire / Explosion

!

Summary of Contents for HY70DKH













































Reviews: