Hyundai IT R Series, Service Manual

Page: 19 / 41

Service Manual
18
Chapter 4- Disassemble and Assembly
1. Precaution
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple model if applicable]
LCD Monitor / R247DP*
Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where
components and materials requiring selective treatment can be removed.
Tool Description
Tool Size
(if
applicable)
Scewdrivers
Product Disassembly Process
List the basic steps that should typically be followed to remove components and materials requiring selective tratement:
1. With the aid of a screwdriver, loosen the four screws of stand.
2. Loosen the two screws of rear cover with screwdriver and then disassemble the rear cover from set.
3. Disconnect the backlight wire from the panel.
4. Loosen the three screws of driver board with screwdriver then disassemble driver board from set.
5. Loosen the six screws of mainboard cover with screwdriver then disassemble mainboard cover from set.
6. Loosen the four screws of mainboard with screwdriver then disassemble mainboard from set.
7. Loosen the four screws of speakers with screwdriver then disassemble speakers from set.
8. Disconnect the LVDS cable from the panel.
9. Loosen the five screws of front frame with screwdriver.
10. Loosen the six screws of Middle frame with screwdriver then disassemble middle frame from set.