31
To confirm sensor you assigned, turn off power and then turn it on again.
Activate
L C D
Sensor
VOICE Please activate sensor and remote controller.
If you want to assign “Motion detector” as sensor no.3
Motion_sens 01
L C D
1=ok 2=change
VOICE
Motion detector, No.3, Press no.1 for selection, press no.2 for change.
If you select change (no.2), you will see the below message:
Motion sensor
L C D
Sensor No=
VOICE
Motion detector, please input number. Please press set key
after finishing.
To record alarm notification message [3=Record]
Speak slowly & clearly while recording (Max. 30 seconds)
K E Y 3 + [Message and address record] + WAIT/SET
Record address
L C D
Press any key
VOICE Please leave your message after the beep and then press set key.
“3” Record user message [3=recording]
Summary of Contents for SAVERCALL-3000
Page 79: ...79 MEMO ...
