8
Phenomena
Analysis Solution
You can not communicate You may have been too far away from the
Move towards other members. And
with other members.
group members.
make sure that you are within the
communication range.
Irrelevant communications The radio may have not been set with
Set your CTCSS/CDCSS signaling the
or noises are heard on the CTCSS/CDCSS.
same as that of other members.
channel.
(Go to the dealer for this programming.)
The noise is too loud.
You may have been too far away from other
Move towards other members, power
members.
off your radio and then restore its
power.
You may have been at an unfavorable
Move to an open and flat area, and
position. For example, your communication
restore the radio power.
may have been blocked by high buildings or
frustrated in the underground areas.
Troubleshooting
If the above solutions can not fix your problems, or you may have some other troubles, please contact us or your local
dealer for more technical support.
