Hytera PD70X Series, System Planner Manual

Page: 119 / 182

Hytera DMR System Planner
115
ˆ Transmitting
Set the TX frequency.
Set TX CTCSS/CDCSS type.
Set CTCSS.
Set CDCSS code
Mixed channel setting:
ˆ Channel Spacing
Configure the bandwidth of the TX frequency and RX frequency.
ˆ Carrier Squelch Level
For better communications, you can set the squelch level of the repeater.
ˆ Color Code
Set whether the CTCSS/CDCSS table is applied during decoding.
ˆ
Type of PTT TX Channel
Set the channel for transmitting audio.
ˆ Pre-emphasis
Set whether the audio would be pre-emphasized.
ˆ Scrambler
Set whether the signal will be encrypted.
ˆ Flat Audio
Set the way of the output of the audio signal from the accessory pin.
ˆ Receiving
Set RX frequency
Set CTCSS/CDCSS type.
Set CTCSS.
Set CDCSS code
ˆ Transmitting
Set the TX frequency.
Set TX CTCSS/CDCSS type.
Set CTCSS.