The GPS antenna connector is used only by mobile
radios with GPS feature.
Remote Speaker Microphone
You can request your dealer to program the following
keys as shortcuts to assignable radio features:
TK
,
P1
,
and
P2
key.
Installation
Instructions
Before you install the radio in a vehicle, read the
following instructions carefully:
l
The radio must work with a 13.6 V ± 15% negative
ground electrical system. Ensure to check the
polarity and voltage of the vehicle power supply prior
to installation.
l
Check how long the screws will extend from the
bottom surface of the radio. Drill the mounting hole
cautiously to avoid damage to the vehicle wiring and
other parts.
l
Connect the antenna and power cord to the radio
before you install it in the bracket. And make sure the
antenna and power cord are dedicated for digital
radios of the Company.
l
Install the radio with mounting bracket supplied by the
Company, to avoid radio looseness in case of
accidents. The loose radio may cause bodily injury.
l
Install the radio in a location where you can reach the
front panel conveniently.
l
Keep sufficient clearance at the back of the radio for
wiring.
l
Be sure to use the fuse with the same specification for
DC power cord upon replacement.
l
If any other devices are in the vicinity of this radio,
the antenna of this radio shall be no less than 10
meters away from that of such RF device.
Tools
l
Electric drill
l
Cross head screwdriver
l
T20 torx screwdriver
Parts
NO.
Part Name
NO.
Part Name
1
Mobile Radio
6
4 mm x 16 mm
Screw
2
Locking Knob
7
Microphone
Hanger
3
Mounting Bracket
8
Power Cord
4 4.8 mm x 20 mm Screw 9
RF Antenna
5
Remote Speaker
Microphone
10
GPS Antenna
3
