Palm Microphone
Programmable Keys
You can request your dealer to program
TK
,
P1
key, and
P2
key as shortcuts to assignable radio features.
Installation
Instructions
Before installing the radio in a vehicle, read the following
instructions carefully:
l
The radio must work with a 13.6V ± 15% negative
ground electrical system only. Ensure to check the
polarity and voltage of the vehicle power supply.
l
Check how long the screws will extend from the
bottom surface of the radio. Drill the mounting hole
cautiously to avoid damage to the vehicle wiring and
other parts.
l
Connect the antenna and power cord to the radio
before you install the radio in the bracket. Use the
antenna and power cord authorized by the Company
only.
l
Install the radio with the mounting bracket supplied by
the Company to avoid radio looseness in case of
accidents. The loose radio may cause bodily injury.
l
Install the radio in a location where you can reach the
front panel conveniently.
l
Keep sufficient clearance at the back of the radio for
wiring.
l
Be sure to use the fuse with the same specification for
the DC power cord upon replacement.
l
Ensure that the antenna of the radio must be no less
than 10 meters away from that of other RF devices.
Tools
l
Electric drill
l
Cross head screwdriver
l
T20 torx screwdriver
Parts
NO.
Part Name
NO.
Part Name
1
Mobile Radio
7
Microphone
Hanger
2
Locking Knob
8
GPS Antenna
3
Mounting Bracket
9
GPS Module
4
Screw (4.8 mm x 20
mm)
10
Power Cord (with
fuse)
5
Palm Microphone
11
RF Antenna
6 Screw (4 mm x 16 mm) 12
/
3
