background image

Specification

Talk Time

>4 hours

Dust/Water 
P r o t e c t i o n 
Class

IP54

Operation 
Temperature

Wireless Earpiece: -20˚C to 

60˚C

Wireless Audio Adapter: 
-25˚C to +65˚C

Storage 
Temperature

Wireless Earpiece: -40˚C to 

75˚C

Wireless Audio Adapter: 
-40˚C to +75˚C

Charging the Wireless 
Earpiece

Note:

 

To charge the wireless earpiece, 
simply connect it to the adapter on 
the radio. It is recommended to use 

the  high-capacity  battery  specified 

by  the  Company  to  ensure  the 
optimal  operation  duration  of  the 

radio. 

 

Charging  the  wireless  earpiece  will 
not affect the radio operation. 

 

If  the  earpiece  is  idle  for  a  long 

time, charge it at least once within 
three months. 

 

If  the  LED  indicator  does  not  glow 

red while the wireless earpiece is 

being charged, charge the earpiece 
for  10  to  20  minutes  for  it  to 

recover to normal status. 

Charge  the  wireless  earpiece  before  use. 
The  LED  indicator  of  the  wireless  earpiece 
glows  red  during  charging  and  glows  blue 
when the wireless earpiece is fully charged. 
Also, the LED indicator indicates the pairing 
and  connection  status.  Please  refer  to  LED 
Indication for details. 
1.  Connect the wireless audio adapter to 

the radio and secure the screw to fasten 
it. 

Summary of Contents for ESW01











Reviews: