第
页
共
32
页
24
2. Press the [0] key twice, then the last dialed number (up to 16 digits) is dialed and
displayed on LCD.
3. Press the [PTT], the number is transmitted.
Note: The redial memory is cleared once radio power off.
Code Squelch
This feature can be enabled/disabled by your dealer. If the feature is enabled, the preset
2-Tone controls radio mute/unmute. The radio will not unmute until matched signalling is
received.
▇
Receive
1. Radio is unmuted when matched 2-Tone signalling (programmed by your dealer) is
received, the user can hear from the transmitter without any other operation.
2. The “
” icon flashes on LCD, and the LED flashes orange.
3. Radio is muted upon press the programmed Monitor key, or no signal is received within
the preset time period.
4. If the alert tone is enabled, radio will emits alert tone when match signalling is received.
If the Transpond is enabled, radio will transpond a tone to the calling radio. However, radio
will not transpond if a group call is received.
▇
Transmit
1. Holding down the [PTT]
2. While encoding, the LED lights red.
Please refer to the [TTS] key for 2-Tone encoding.
3. Upon release the [PTT], the signalling squelch is disabled, the “
” icon flashes on
LCD, and LED flashes orange. The LED lights green while signal is received, and
flash orange if signal off.
4. If the programmed [Monitor] key is pressed, or no signal is received within the preset
time period, the signalling squelch is enabled.
