第
页
共
32
页
2
HOT SURFACE
Avoid c onta ct durin g prolonged us e
Do not touch the metal surface of the radio while it is in use.
Do not mount the radio such that the chassis can come in contact with skin.
High temperatures may burn you skin.
M
ANDATORY
S
AFETY
I
NSTRUCTIONS TO
I
NSTALLERS AND
U
SERS
════════════════════════════════════════════════════════════════
z
Use Only manufacturer or dealer supplied antennas and power cable (32V/15A, with
safety fuse).
z
Maintain at least
100
cm distance from the antenna
z
Antenna used for this transmitter must not exceed an antenna gain of 3dBi
●
Antenna mounting: The antenna supplied by the manufacturer or radio dealer must not
be mounted at a location such that during radio transmission, any person can come closer
than the above indicated minimum safe distance to the antenna (i.e.
100
cm).
●
To comply with current FCC RF Exposure limitations, the antenna must be installed at or
exceeding the minimum safe distance indicated above, and in accordance with the
requirements of the antenna manufacturer or supplier.
●
Vehicle Mounting: The antenna can be mounted at the center of a vehicle metal roof or
trunk lid if the minimum safe distance is observed.
●
Antenna substitution: Don’t substitute the antenna supplied or recommended by the
manufacturer or your dealer. You may be exposing person(s) to excessive radio frequency
radiation. Please contact your dealer or the manufacturer for further instructions.
●
Please make sure no stress on the antenna joint during transportation or installation.