Low atter War ing
Low Battery Warning alerts you to recharge or replace the battery. When the batter
B
y
n
y
oltage becomes low, radio LED will flash red and three Beeps sound every 30 seconds,
arge or replace the battery with a new one.
or code are received. This
llows you to ignore (not hear) these calls. Likewise, your signals will be received only by
ame CTCSS/DCS signalling.
TMF Signalling
d/disabled by your dealer. When DTMF signaling is
rogrammable key
(Call 1, Call 2) to transmit 2-Tone/5-Tone/HDC2400
TM
signal.
/HDC2400
TM
is set on a channel, the preset functions will be
v
indicating to rech
Safety Check
When receiving a safety check call, the radio will emit an alert tone in preprogrammed
time. Press any key to respond and cancel the alert, otherwise, the radio will automatically
enter emergency mode.
CTCSS/DCS Signalling
CTCSS/DCS may have been programmed on a channel to ignore unwanted calls from
other parties on the same channel. When CTCSS/DCS signalling is set, the squelch will
be opened only when signals containing the matching tone
a
parties using the s
Although it may seem like you have a private channel while using CTCSS/DCS signalling,
other parties can still hear your calls if they use the same tone or code.
D
DTMF Signalling is enable
programmed on a channel, press the programmable key (Call 1, Call 2) to transmit DTMF
code.
●
LED glows red during transmission and goes out when transmission ends.
2-Tone/5-Tone/HDC2400
TM
Signalling
2-Tone/5-Tone/HDC2400
TM
signalling is enabled/disabled by your dealer. When 2-Tone/
5-Tone/HDC2400
TM
signalling is programmed on a channel, press the p
When 2-Tone/5-Tone
26
