7
﹡
TK (Top Key)
Programmable function key.
﹡
Channel Selector Knob
Rotate the knob to select a desired channel.
﹡
Radio On-Off/Volume Control Knob
Rotate the knob clockwise to turn the radio on, and rotate the knob fully counter-clockwise until a click is heard to turn the
radio off.
Turn the knob clockwise to increase the volume, or counter-clockwise to decrease the volume.
﹡
LED Indicator
Status
LED Indications and Tones
Source radio: Turn the radio on while
holding down
PTT
and
SK2
.
Target radio: Rotate the
Radio On-Off
knob clockwise to turn the radio on.
The orange LED flashes twice.
Source radio: turn on the target radio
and connect the cloning cable. Then
press the
PTT
on the source radio to
initiate cloning.
1. LED solidly glows red when
cloning is in progress;
2. LED goes out when cloning is
completed;
3. LED flashes red when cloning
fails.
Wired Clone
Target radio
1. LED solidly glows green when
cloning is in progress;
2. LED goes out when cloning is
completed.
Power On
The green LED flashes once.
Low Battery Alert
Three beeps are heard.
Transmitting
LED glows red.
Receiving
LED glows green when carrier
presents.
Scanning
Red LED flashes once every 1
second. The green LED flashes when
