30
Programming
The radio is programmed with the dedicated programming cable and software. Operations are as follows:
1. Connect the radio to the PC serial port with the programming cable.
2. Power on the radio.
3. Run the programming software.
Remove the programming cable after programming is completed.
Manual Dial
The radio supports CPSX and MPT1343 numbering schemes. PABX call, PSTN call, emergency call, priority call, call
forward and any group call can be made only when the corresponding right is programmed.
If Fleet Individual Call Inhibit is set in the programming software, individual calls are prohibited on the corresponding fleet. If
Fleet Group Call Inhibit is set, group calls are prohibited on the corresponding fleet. This setting can limit the user’s call right.
CPSX Manual Dial
No. LED
Indication
1
Not light
Power off or flat battery
2
Green
Receiving in the network
3
Red
Transmitting in the network or in talk around mode
4
Flash Green
The radio locks onto a system. The flash frequency is
dependant on the frame length of the current system
signalling.
5
Flash Red
Poor signal, code error
6 Flash
Orange
Scanning
Precautions:
1. Install the programming software into your computer first.
2. Many functions can be set via the programming software. Read the Help File of the programming software carefully
before programming.
