22
Function Description
Power On Status
Power on the radio in trunking mode. Enter the password if power on password is set and “Welcome!” appears on the LCD.
The power on display can be changed in Model Information in the programming software.
Then the radio scans automatically. The LED indicator and
at the top right of the LCD flash, indicating the radio is
scanning.
Scan recycles according to the preset mode until the radio has registered successfully. There are four scan modes: control
channel table scan, band scan, all frequency scan and flexible channel plan.
Take all frequency scan for example.
After the radio has registered successfully, the LCD displays “Register Success” and icon
appears at the top right of the
LCD, indicating the radio has automatically locked onto the local system. If the radio roams to other systems, icon
appears at the top right of the LCD. If the radio does not lock onto a system, scan recycles automatically. Whether to display
is dependant on the roaming icon display parameters set in the programming software. Please refer to the Help File of
the programming software for details.
After the radio has registered successfully, the radio will enter the standby status automatically with green LED flashing. The
LCD displays ID or number/alias of the work group in which the radio is in before power-off.
Chinese/English Menu
Scan Channel XXXX
Welcome!
ID
XXXXXXXXXX
01 taking part in XXXXXXXXX
01 Vice Squad 1
Note: Pay attention to the use of the long or short press definitions. The short press is not applicable for all features. Man
Down and Whisper features must be enabled/disabled via long button press. It is recommended to fix the use in the
programming software.
