Figure 4. Install C-Clamps to Rear Frame
b.
Ensure clamps are secure before lifting the
reach carriage assembly.
c.
Install a chain loop or sling through each
clamp separately, and attach each loop to the
overhead lifting device.
5.
Raise the reach carriage assembly high enough
to access the hydraulic connections and wiring
harness mounting plate on the rear frame.
6.
Safety chain the reach carriage assembly in
place. See Safety Procedures When Working
7.
Disconnect the lift chains from the reach car-
riage assembly:
a.
Remove the cotter pin and chain anchor pin
securing the chain to the anchors.
NOTE:
Make sure lift chains, wiring, and hoses are
secured out of the way so they do not interfere with
reach assembly removal procedures.
b.
Secure chains to the mast using stiff wire to
keep them from falling from the sheaves.
Reach Carriage Assembly
4500 SRM 1196
6