10.
Remove bushings from fixed frame.
11.
Disassemble sideshift cylinder only if needed
for service. See Sideshift Cylinder.
12.
Remove trunnion caps, capscrews (12), and pins
(25) from each side of tilt cylinder.
13.
Remove tilt cylinder.
14.
Remove bushings from tilt cylinder.
15.
Disassemble tilt cylinder only if repair is neces-
sary. See Tilt Cylinder.
1.
LUBE FITTING
2.
WEAR STRIP
3.
WEAR STRIP
4.
RETAINER PLATE
5.
LOCKWASHER
6.
CAPSCREW
7.
TILT CYLINDER
8.
PIVOT PIN
9.
BUSHING
10. FIXED FRAME
11. TRUNNION CAP
12. CAPSCREW
13. ROD
14. WIPER
15. SEAL
16. SLEEVE
17. SEAL
18. TILTING FRAME
19. WEAR STRIP
20. NUT
21. FORK CARRIAGE
22. CAPSCREW
23. BRACKET
24. CAPSCREW
25. PIN
26. BUSHING
27. LUBE FITTING
28. PIVOT PIN
29. RETAINER CAPSCREW
Figure 9. Front Frame With Sideshifter
4500 SRM 1196
Reach Assembly Front Frame
13
