4000 SRM 482
Load Backrest Extension, Carriage, Load Rollers, Side Rollers, and Forks
4.
Reverse the procedure to install the side rollers.
Adjust the carriage side rollers during assembly.
See Carriage Adjustments.
NOTE:
To remove and replace load rollers, wear
plugs, weldments, or lift cylinders, it is necessary to
remove the two-stage mast assembly from the truck.
FORK, REPLACE
Read and follow the Safety Procedures When Work-
ing Near Mast, as well as all WARNINGS and CAU-
TIONS.
Hook-Type Forks
WARNING
Forks are heavy and can cause an injury. Do
not try to remove forks without using a lifting
device.
These forks are connected to the carriage by hooks.
See Figure 6. Latch pins fit through the top fork
hooks and into slots on the top crossmember of the
carriage to keep the forks in position.
Figure 6. Forks
7
Summary of Contents for MAST N30XMH
Page 14: ...Two Stage Mast Assembly 4000 SRM 482 Figure 10 Two Stage Mast Assembly Dual Lift Cylinders 10 ...
Page 27: ...4000 SRM 482 Three Stage Mast Assembly Figure 18 Three Stage Mast Assembly 23 ...
Page 34: ...Three Stage Mast Assembly 4000 SRM 482 Figure 21 Hose and Cable Assemblies Outer Weldment 30 ...
Page 51: ......
