OTHER LUBRICATION POINTS
Lubricate the hood hinges, pins, linkages, cables, ped-
als, and levers as necessary. Use SAE 30 oil and multi-
purpose grease as needed.
EVERY 1000 HOURS OR SIX MONTHS
FINAL FUEL FILTER (DIESEL)
(Item 4)
Change the fuel filter as needed. The frequency of
changing the fuel filter is a result of fuel quality.
A. Clean the area around the final fuel filter.
B. Remove the bolt in the center of the top cover of
the filter.
C. Lower the bottom of the filter and remove the fil-
ter element. Discard the filter element.
D. Clean the top and bottom covers. Install new gas-
kets. Install a new filter element and tighten the bolt.
E. Remove the air from the fuel system as described
in REMOVING AIR FROM THE FUEL SYSTEM.
REMOVING AIR FROM THE
DIESEL FUEL SYSTEM (See
Figure 16)
Air must be removed from the diesel fuel system if the
engine has run out of fuel or when a fuel line has been
disconnected. Remove air from the fuel system as
follows (See Figure 16):
CAUTION
Do not start the engine until air is re-
moved from the fuel system.
FIGURE 15. FINAL FILTER
Summary of Contents for F003
Page 1: ...Hyster F003 H2 00J H2 50J H3 00JS Europe Forklift...
Page 3: ...MAINTENANCE SCHEDULE...
Page 4: ......
