UPRIGHTS
WARNING
Do not work under a raised carriage.
Lower the carriage or use a safety chain
to prevent the carriage from lowering
when servicing the uprights and lifting
chains.
A. Lubricate the sliding surfaces as shown in Figure
13. Apply lubricant only to the indicated surfaces.
Do not lubricate the rolling surfaces of the load roll-
ers. Lubricant on the load rollers can hold dirt and
prevent the load rollers from turning. Flat areas will
wear on the load rollers when they do not turn freely.
B. Lubricate the latches (free-lift uprights). Check for
broken springs and damaged parts. Replace any parts
that are damaged or missing.
C. Lubricate the two grease fittings for the upright
pivots.
NOTE
The load rollers and sheaves have sealed
bearings which do not need additional lu-
brication.
FIGURE 13. UPRIGHT LUBRICATION
FIGURE 14. UPRIGHT LATCHES
Summary of Contents for F003
Page 1: ...Hyster F003 H2 00J H2 50J H3 00JS Europe Forklift...
Page 3: ...MAINTENANCE SCHEDULE...
Page 4: ......