2200 SRM 1357
Control Handle
WARNING
Move the truck to an area with plenty of room
where top speeds can be checked safely.
11. Test the high speed switch for proper operation.
12. Install the floormat.
1.
COVER
2.
SCREW
3.
LOCKWASHER
4.
NAMEPLATE
5.
BASE
6.
SCREW
7.
LOCKWASHER
8.
INSULATION
9.
SWITCH
10. ACTUATOR PLATE
11. ACTUATOR
12. SPRING
13. SCREW
14. SCREW
15. CABLE CLAMP
16. WHITE WIRE
17. SCREW
18. LOCKWASHER
19. GROUND SCREW
20. BLACK WIRE
Figure 14. Foot Switch
Control Handle
DISASSEMBLE
WARNING
DO NOT make repairs or adjustments unless
you have both authorization and training. Re-
pairs and adjustments that are not correct can
create a dangerous operating condition. DO
NOT operate a lift truck that needs repairs. Re-
port the need for repairs to your supervisor im-
mediately. If repair is necessary, put a DO NOT
OPERATE tag on the control handle. Remove
the key from the key switch.
It is not always necessary to remove and disassemble
all the components of the control handle to replace a
damaged part. Perform only the steps necessary to
replace the damaged parts. See Figure 15.
1.
Move truck to a safe, level area.
2.
Block wheels to prevent truck from moving.
3.
Remove the key from the key switch. Disconnect
battery.
17