Page 2
www.hysecurity.com © 2013
P/N MX3431 D0596 Rev A
Technical Support
For technical support, call your installer or authorized HySecurity distributor.
Obtain the serial number of your operator before calling.
For the name of a distributor near you, call HySecurity at 800-321-9947.
12
2
12
3
24VDC
Connect wire leads to
junction box.
Insert the wires into the supplied
pig tail connector:
• Red
wire from the junction box
with Positive wire lead coming
from the power cable
• Black wire from the junction
box with Negative wire lead
coming from the power cable
Crimp the pig tail using pliers as
shown in the photo.
In-ground power cable
Pig tail
connector
Junction box wires:
• Red wire to Positive lead
• Black wire to Negative lead
Make sure all power switches are in the OFF position. Follow all electrical code standards and
regulations.
DANGER
Connect in-ground power wire to Smart DC
Remote Power Supply.
Power cable return
to Smart DC Remote
power supply
12
4
Connect Smart DC Remote Power
Supply to AC power.
12
5
Turn ON Smart DC
gate operator.
When you plug the Smart DC Remote power
supply into an AC outlet, an LED illuminates
indicating power is available to the operator.
DC
motor &
battery
power
switch
Refer to the illustration in step 2.
• Turn ON the DC Motor & Battery
power switch first. The display lights
indicating power is being supplied
through the batteries.
• Turn On the Solar Panel power switch.
In this case, it is connected to the
Smart DC Remote power supply.
LED illuminates when
AC power is supplied
Power supply wires:
• Red wire to
Positive wire lead
• Black wire to
Negative wire lead
coming from the
power cable
Power
source
switch
Chassis
base
Junction
box
Wires from
power supply
