14
© Copyright 2021 HYPERVSN. All rights reserved
5.
MASTERBOX INSTALLATION
Picture 6. MB wall mount
The MasterBox may be mounted on a wall with a MB wall mount.
The MB wall mount has three holes, each with a 4.3 mm diameter.
Attention.
The length of the Sync cable intended to connect the MasterBox to the
Device is 3m long. The MB wall mount must be mounted at a distance of no more than
3 m from the MasterBox (in order to connect the MasterBox to the nearest mounted
Device).
Installation procedure
1.
Mark the desired spot for mounting on a surface/wall from the center of the MB
wall mount.
(This will be the drill’s entry point).
2.
Position the MB wall mount over the marked area for drilling on a wall, so that its
central hole lines up with the new mark. Keep the orientation of the MB wall mount
the same as indicated in
below. (Be sure that it is level).
3.
Mark the position of the 3 mounting holes on the wall.
4.
Drill 3 holes in the marked positions.
5.
Using the appropriate mounting hardware, firmly attach the MB wall mount to a
wall.
Picture 7. MasterBox installation on a wall
6.
Place the MasterBox on the MB wall mount and slide it downwards firmly.
