Powermax30
Field Service Bulletin 805260
5
T30v Torch Lead Replacement
Disconnect the lead from the power supply
1.
Compress the hose fitting collar and pull the hose from the fitting to remove the gas hose from the solenoid valve.
2.
Loosen the strain relief nut on the outside of the front panel.
3.
Carefully tilt the front panel away from the power supply. Locate the 3-pin connector at the TORCH START slot (J12)
on the power board (on the side facing the heatsink) where the orange, blue, and purple wires from the torch lead
connect.
1
2
3
4
1
Front panel
2
Solenoid valve
3
Hose fitting collar
4
Gas hose
2
1
1
J12
2
Front panel