600V INSTALLATION
600V Installation Manual
2-7
4.
Remove the power supply cover (Powermax900 only).
5.
Carefully tilt Powermax over onto its front handle as shown in Figure 2-5.
6.
Place the 001568 power supply bracket against the bottom of the power supply as shown
in Figure 2-5 and fasten with the 075470 10-32 screws, 075174 star washers and
075160 kepnuts in 12 locations.
Note: The Powermax800 chassis does not require the 075160 kepnuts.
Figure 2-5 Attaching 600V Power Supply Bracket to Powermax Chassis
001568
Power supply
bracket
075160
Kepnuts (on inside)
(12)
075174
Star washers (12)
075470
Screws (12)
