Hypertherm PAC500, Instruction Manual

Page: 23 / 96

PAC500 Instruction Manual 2-3
4
SPECIFICATIONS
Model 500 Torch
Cutting Thickness Range..................................035 in. to 3 in. with nitrogen
3 in. to 6 in. with 65% argon-35% hydrogen
Maximum Current Capacity .............................750 amperes with nitrogen
1000 amperes with 65% argon-35% hydrogen
Cutting Gas Flow Range..................................165 to 260 cfh with nitrogen
270 to 300 cfh with 65% argon-35% hydrogen
Cutting Water Flow Range ............................... .50 gpm
Electrode Cooling Water Flow .........................1.6 gpm
Dimensions ......................................................2 in. dia. x 17.5" long
Weight..............................................................3.5 lbs. without service lines
15 lbs. with 20 ft. service lines
Control Console
Electrical Input .................................................120 VAC, 50/60 Hz, 5 amperes
Cutting Gas Supply ..........................................nitrogen: 260 cfh (max) at 150 psi
65% argon-35% hydrogen: 300 cfh (max) at 150 psi
Water Supply ...................................................2.5 gpm at 175 psi (includes both electrode
and cut water flow)
Dimensions
Width................................................................13 in.
Height...............................................................16 in.
Depth ...............................................................15 in.
Weight..............................................................75 lbs.
Operator’s Panel
Dimensions
Width................................................................6.5 in.
Add 6 in. in width for each additional torch
Height...............................................................14 in.
Depth ...............................................................6 in.
Weight..............................................................12 lbs. (single torch)