Duramax Hyamp Torches with 46 m (150 foot) Leads
Powermax125
Field Service Bulletin
810260
3
Introduction
Purpose
The information in this Field Service Bulletin is specific to using Duramax Hyamp torches with 46-m
(150-foot) torch leads on Powermax125 systems.
Compatibility
Duramax Hyamp torches with 46-m (150-foot) torch leads are compatible only with
Powermax125 systems.
IMPORTANT:
If your Powermax125 has a
serial number of 125-007943 or lower
, you
must install a new DSP board (428119) in order to use a 46-m (150-foot) torch. Make
sure the DSP board is at Revision C or higher.
For instructions on how to install the DSP board, refer to the
Powermax125 Service Manual
(808070). Download the manual at
www.hypertherm.com/docs
.
Duramax Hyamp torches with 46-m (150-foot) torch leads cannot be used with any other
Powermax systems.
Part numbers
WARNING
ELECTRIC SHOCK CAN KILL
Disconnect all electric power before doing any installation or maintenance.
All work requiring removal of the plasma power supply cover must be done by
a qualified technician.
See the
Safety and Compliance Manual
(80669C) for more safety
precautions.
Part number
Description
059664
Duramax Hyamp 15° hand torch assembly with 46 m (150 foot) lead
059665
Duramax Hyamp 85° hand torch assembly with 46 m (150 foot) lead
059666
Duramax Hyamp 180° mini machine torch assembly with 46 m (150 foot) lead
059667
Duramax Hyamp 45° long handheld torch assembly with 1.2 m (4 foot) extension and
46 m (150 foot) lead
