Hypertec Ciara Astro PB60S, User Manual

Page: 19 / 29

Astro SN-7375
- 19 -
3.5 - Installing top memory module
IMPORTANT !

Refer to http://www.asus.com for the list of compatible DIMMs.
You can only install DDR4 SO-DIMMs to the Micro PC’s DIMM slot.

Only CIARA-authorized technicians should remove and install motherboard and mechanical parts inside your Micro PC. Please
refer to the terms and conditions in the warranty card.

Visit an authorized CIARA service center or retailer for information on module upgrades for your Micro PC.
1. (optional) Remove the storage bay if a storage bay is installed. Follow step 2 under the Installing 2.5” HDD or SSD section to
remove the storage bay.
2. Remove the two (2) screws securing the fan (A), then disconnect the fan connector (B) and lift the fan upwards so that it is
perpendicular to the heatsink (C), but do not remove the fan completely.
3. Align and insert the memory module into the slot (A) and press it down (B) until it is securely seated in place.