Hyperion Gateway Installation Guide
www.wrensolutions.com
7L776
Rev A 190510
I
DENTIFY
AN
APPROPRIATE
MOUNTING
LOCATION
1
Table Mount
The Gateway is equipped with rubber feet pre-installed
for table mounting applications. If table mounting, the
wall bracket will not be needed.
Wall Mount
The Gateway should be mounted to a structurally solid
wall surface using the included bracket. Mount by using
the appropriate fasteners and anchors for the mounting
surface. (Fasteners and anchors are not provided).
3
C
ONNECT
E
THERNET
NOTE
: N
ETWORK
CONNECTIVITY
IS
REQUIRED
FOR
CUSTOM
CONFIGURATION
,
BUT
NOT
REQUIRED
FOR
THE
GATEWAY
TO
OPERATE
.
Connect the Ethernet cable to the
provided Ethernet network socket as
depicted to the right.
4
C
ONNECT
H
YPERION
D
EVICES
Before connecting cables from devices, refer to the
Gateway Configuration Plan
to ensure Hyperion devices are
plugged into their respective ports
.
For Gateways that were not factory-configured, please complete the
Gateway Configuration Plan
before making any
connections.
NOTE:
•
THESE
ARE
NOT E
THERNET
PORTS
•
E
NSURE
THAT
ALL
CABLING
C
ONNECTIONS
HAVE
BEEN
CERTIFIED
BEFORE
ATTACHING
TO
THE
GATEWAY
•
I
MPROPER
CABLING
COULD
DAMAGE
THE
GATEWAY
AND
VOID
PRODUCT
WARRANTY
•
C
ABLES
RUNS
HOULD
NOT
EXCEED
300
FEET
2
NOTE
:
•
T
HE
LONGER
ANTENNA
CONNECTS
TO
THE
“H
YPERION
”
JACK
•
F
OR
BEST
RESULTS
,
THE
ANTENNA
SHOULD
BE
POINTED
AS
VERTICALLY
AS
POSSIBLE
C
ONNECT
A
NTENNAS
Hand-tighten the appropriate
antenna to the corresponding
jack until snug.
Do not over-tighten.
