© 2009 Hyperdyne Labs
16
EXAMPLE MOUNTING INSIDE HILT
(not to scale)
Electronic Specifications
Unit dimensions: 2” L x 1” W
Speaker: 1-1.4” diameter, 4-32 ohm,
Audio output power: 750mW-1W
Input voltage: 6-14V
Current consumption: 250mA when sound active, 20mA when sound inactive
NOTICE:
There is no warranty on kits. It is your responsibility to install the board. Opened kits cannot be returned. Be careful if
you use a battery source that is capable of delivering a lot of current. Contact a professional if you need assistance. Hyperdyne Labs
assumes no responsibility for the misuse of this kit or any damage to your saber hilt due to improper installation. This guide is only
one way to do the install and does not represent all methods. Use at your own risk!!
speaker
Battery
pack
Hyperblade
SaberSD sound
board
Hyperblade
driver
