© 2009 Hyperdyne Labs
13
Here is a diagram showing how to connect up your switch inputs using the header pins
(the header cable is also available from us to simplify hookup).
Connecting a force-feedback vibration motor (OPTIONAL)
If you wish to use a vibration motor with your sound board, you can easily connect one to
the board. The 2 pads near the middle edge of the board have a “mtr” label next to them.
You can connect your motor wires to these pads (polarity doesn’t matter). Do not try and
install your own motor if you are not comfortable soldering small parts!!
Here is a picture demonstrating the hookup
NOTE: To avoid damage if you are using a small 1.5-3V vib motor, be sure to read
the above section regarding the proper settings for the different vibration effects.
header
On/off switch
(momentary or latching*)
SaberSD board
+
-
battery
Deflection
(aux) switch
Clash output
(5V TTL)
SD card
* switch type is set up in software