Wireless POS Terminal Interface
940184-003, rev. B
Hypercom Corporation
4-7
5.
Insert the male connector of the 12-foot cable from the terminal transceivers into the female
connectors marked
Terminal Transceiver 1
or
Terminal Transceiver 2
on the terminal transceiver
interface.
If the 12-foot cable is not long enough, it may be extended up to 1000 feet by using any four
conductor, one-to-one standard telephone extender cable available at various electronic appliance
retail outlets. You can also have the premises wired for extending the cables. Firms that install
telephone cabling in buildings can perform this task because the wiring is identical to a two-circuit
telephone system.
Figure 4-4. Premises wiring diagram
W
ARNING
To avoid damaging the terminal transceiver unit, do not insert the cable connectors from the single unit
adapter or the terminal transceiver into any receptacle designated for use with the premises telephone
system.
