78
Connections Setting
The second part is the connection setting, you can configure the local and the remote side
setting for each connection.
For the Net-to-Net scenario, you can configure the information of
Host
,
Subnet
and
ID
for the
local and remote side. In this case, the #1 connection is edited from connections tab for setting
up the Net-to-Net configuration.
l
Local Side
First, fill up the local Host and Subnet fields by the network information of IPSec server.
And, use the network information of IPSec client to fill up the remote setting.
Then, specify the ID for the both sides.
In this case, the IDs for the local and remote side are named as @local and @remote
respectively.
Note:
The ID should be started with @ symbol. The above settings will make the traffic between
192.168.1.0/24 and 10.0.0.0/24. They can be forwarded by IPSec tunnel.
l
Remote Side
The setting for remote side is similar to Local Side. Just swap the local settings with the remote
setting.
www.e-rake.us.com
