117
(2) OpenVPN client configuration
For the OpenVPN client side, the basic setting is as below figure.
The
Server Address
is required field, which indicate the OpenVPN server address which
OpenVPN client try to connect. And the
PKCS12 Password
only works when selected the
pkcs #12 Certificate
authentication option.
This option require the P12 file which generated from Generic Setup OpenVPN server part.
The password also be set on the Generic Setup OpenVPN server part.
If you use the Certificate authentication option, the OpenVPN client will require the
Root CA
,
User cert
and
User key
files.
Same as the OpenVPN server configuration part, OpenVPN client web UI also provides the
status information. When all settings set up properly, the status will change from
Idle
to
Running
. When OpenVPN tunnel is created, the status shows
Connected
and the information
for IP address and the time.
www.e-rake.us.com
