www.hypercable.fr
www.e-rake.fr
12
2-4 Hardware Installation
The 4GHz 2x2 MIMO Radio is a radio device, so it is susceptible to common causes of
interference that can reduce throughput and range. Follow these basic guidelines to ensure
the best possible performance:
IF there is any other 4GHz RF device deployed around the outdoor radio, try to set the
channel to the non-overlapping one.
Hardware Installation Figure
Install the bridge at a height sufficient place where structures, trees, or hills do not
obstruct radio signals to and from the unit. A clear line-of-sight path can guarantee the
performance of the RF link.
Site Surveys
Clear and flat area provide better RF range and data rate, on the contrary, physical
obstructions such as trees, electric tower, hills or buildings can reduce the performance
of RF devices. Do not deploy your radios in the location where there is any obstacle
between the antennas.
C
onfigure and verify the 4GHz 2x2 MIMO Radio operations first before you mount the
radio in a remote location.
Power Over Ethernet Injector is not a waterproof unit, should not be exposed to
outdoor without any protection.
Chapter 2 Hardware Installation
Hardware Installation
4GHz 2x2 MIMO
HT-OFDM radio
Router / Switch
(Optional )
OUTDOOR
INDOOR
10/100/1000 Mbps
10/100/1000 Mbps
Passive 48VDC