HYPERCABLE sarl - 74 Avenue Paul Sabatier ZA de la Coupe 11.100 Narbonne Tel : +33 (0) 4 68 70 91 75 - Fax : 04 68 70 91 76
Mail : [email protected] - N° SIRET : 384 007 894 00031 – Code TVA CEE: FR90384007894 -
www.hypercable.fr
WARNINGS
In order to comply with international radio frequency (RF) exposure limits, dish
antennas should be laced at a minimum of 8.7 inches (22 cm) from the bodies of all
persons. Other antennas should be laced a minimum of 7.9 inches (20 cm) from the
bodies of all persons.
Ultimate disposal of this product should be handled according to all national laws and
regulations.
Do not locate the antenna near overhead power lines or other electric light or power
circuits, or where it can come into contact with such circuits. When installing the
antenna, take extreme care not to come into contact with such circuits, as they may
cause serious injury or death. For proper installation and grounding of the antenna,
please refer to national and local codes.
Only trained and qualified personnel should be allowed to install, replace, or service
this equipment.
To meet regulatory restrictions, the PWS-M-AUnit and the external antenna must be
professionally installed. The network administrator or other IT professional responsible
for installing and configuring the PWS-M-AUnit is a suitable professional installer.
Following installation, access to the PWS-M-AUnit should be password protected by
the network administrator to maintain regulatory compliance.
Follow the guidelines in this installation guide to ensure correct operation and safe use
of the PWS-M-A Unit.
There are four types PWS:
A.
PWSA041-1xx
(400MHz TDMA radio with 2.4GHz 802.11b/g/n AP, without battery)
B.
PWSM041-1xx
(400MHz MESH radio with 2.4GHz 802.11b/g/n AP, without battery)
C.
PWSA041-118
(400MHz TDMA radio with 2.4GHz 802.11b/g/n AP, with 12VDC 18AH battery)
D.
PWSM041-118
(400MHz MESH radio with 2.4GHz 802.11b/g/n AP, with 12VDC 18AH battery)
