P
A
G
E
15
Bicycle Assembly
REFLECTORS
REFLECTORS
Reflectors
REFLECTORS
Your bicycle is supplied with one front (white), one rear (red),
two wheel (white), and two pedal (orange) reflectors. These
are an important safety and legal requirement, and should
remain securely fitted and in good, clean conditions at all
times. Periodically, inspect all reflectors, brackets and
mounting hardware for signs of wear or damage. Replace
immediately if damage is found.
(Front Reflector Bracket Installation)
NOTICE:
It is important to check and adjust the position
of the reflectors as you assemble your bike. The reflectors
must always be vertical (perpendicular to the ground) and
pointed toward the front and rear of the bike. Please make
sure that the adjustment is correct as a final step in the
assembly of your bike.
Attaching hardware to the handlebars.
With the white reflector facing forward wrap the rear end of the
reflector bracket around the handlebar(A). Once the bracket is
in the correct position, and the fastening nut is in place
underneath the bracket, thread the screw down through the
top of the bracket. Tighten screw firmly with screwdriver(B).
Handlebar Reflector
Diagram A
Reflector
Bracket
Handlebar Reflector
Diagram B
White
Reflector
A
D
JU
S
T
M
E
N
T
BICYCLE
ASSEMBLY
Summary of Contents for Scotty Cranmer SC1
Page 1: ...B I C Y C L E O W N E R S M A N U A L ...
Page 34: ...P A G E 32 NOTES ...
Page 43: ...P A G E 41 NOTES ...
Page 44: ...P A G E 42 NOTES ...
