HYOSUNG WOW 50, Service Manual

Page: 51 / 133

3-23 ENGINE
REED VALVE
When reinstalling the reed valve and stopper plate to
the body, align the both cut on the reed valve and stop-
per plate.
Apply
THREAD LOCK 1324 to the stopper plate
securing screws.
OIL SEALS
Fit the oil seals to the crankcase following the proce-
dure below.
Replace removed oil seals with new ones.
● Coat SUPER GREASE A to the lip of the oil seals.
●
Be sure to apply THREAD LOCK 1324 to outer
surfaces of right and left crankshaft oil seals to pre-
vent them from moving.
ENGINE REASSEMBLY
Reassembly is generally performed in the reverse order
of disassembly, but there are a number of reassembling
steps that demand or deserve detailed explanation or
emphasis.
These steps will be taken up for respective parts and
components.
Fix the piston ring in the piston ring groove, measure
the ring side clearance with the thickness gauge while
matching the sliding surfaces of piston and ring.
0.02~0.06 mm
(0.0008 ~ 0.0024 in)
0.02~0.06 mm
(0.0008 ~ 0.0024 in)
Standard
Thread Lock : 1324
Thread Lock : 1324
Super Grease A
Sh Sh
Alv
v n
niiaa aa
ellll
3
Indu Indu
Multi-
Multi-pur
pur
strial strial
pose pose
Greas
e
Grease
1st
Piston ring - groove
clearance
2nd