HYOSUNG GT 650, Service Manual

Page: 32 / 210

[ Rear Brake ]
◉
FRONT AND REAR BRAKE FLUID REPLACE-
MENT
●
Place the motorcycle on a level surface and keep the
handlebars straight.
●
Remove the master cylinder reservoir cap and diaphragm.
●
Suck up the old brake fluid as much as possible.
●
Fill the reservoir with new brake fluid.
●
Connect a clear hose ① to the air bleeder valve and
insert the other end of the hose into a receptacle.
Specification and Classification
(Front brake) : DOT 4
(Rear brake) : DOT 4
●
Close the air bleeder valve and disconnect the clear
hose. Fill the reservoir with new brake fluid to the
upper line.
●
Replace the rear brake
’
s fluid with the same man-
ner of the front brake.
Front brake caliper air bleeder valve
: 6~8 N ∙ m (0.6~0.8 kg ∙ m)
Rear brake caliper air bleeder valve
: 6~8 N ∙ m (0.6~0.8 kg ∙ m)
●
Loosen the air bleeder valve and pump the brake
lever until the old brake fluid is completely out of the
brake system.
PERIODIC MAINTENANCE 2-16
①