HYOSUNG Comet 250 FI, Owner'S Manual

Page: 28 / 78

27
①①
CLUTCH LEVER
The clutch lever is used for disengaging
the drive to the rear wheel when starting
the engine or shifting the transmission gear.
Squeezing the lever disengages the
clutch.
②②
“PASS ” SWITCH
Press the “ PASS ” switch to operate the
head lamp high beam for using when pass.
⑤⑤
HORN SWITCH
Press the switch to operate the horn.
④④
TURN SIGNAL SWITCH
Using when left, right turn or change
direction.
◉ “ � ” Position : Flash the left turn
signal lamp.
◉
“
�
” Position : Flash the right turn
signal lamp.
③③
DIMMER SWITCH
Change direction of head lamp light.
◉ “ ” : The head lamp high beam
come on.
The high beam indicator lamp
also comes on.
◉ “ ” : The head lamp low beam
come on.
LEFT HANDLE SWITCH
Do not operate when the dimmer switch
“
” position.
CAUTION
Set the dimmer switch “ ” when other
vehicle is running in front or against.
WARNING
Always use the turn signals when you
intend to change lanes or make a turn.
Always be sure to turn the turn signal
switch to the “OFF” position after
completing the turn or lane change.
CAUTION
�
�
�
�
�
GT250‡»` 2008.7.18 4:12 PM ˘ ` 27 JINSUN 300DPI 100LPI W